Fragoltherm®

Fragoltherm® F-12

FRAGOLTHERM® F-12 is specifically designed for use in systems where contamination of foodstuffs by the heat transfer fluid cannot be ruled out.

FRAGOLTHERM® 550

FRAGOLTHERM® 550 is used for pressureless, indirect heating in heat transfer systems. Typical application areas include, for example, injection molding for the automotive industry, plastics processing, and temperature control processes for the building materials industry.

FRAGOLTHERM® 550

FRAGOLTHERM® 550 is used for pressureless, indirect heating in heat transfer systems. Typical application areas include, for example, injection molding for the automotive industry, plastics processing, and temperature control processes for the building materials industry.

FRAGOLTHERM® 590

FRAGOLTHERM® 590 is ideal for heating/cooling processes and exhibits high thermal stability.

FRAGOLTHERM® 590

FRAGOLTHERM® 590 is ideal for heating/cooling processes and exhibits high thermal stability.

FRAGOLTHERM® 620

FRAGOLTHERM® 620 is used for non-pressurized, indirect heating in heat transfer systems. Typical application areas include, for example, the processing of polymers and plastics, waste heat recovery, and the manufacture of solar panels.

FRAGOLTHERM® 620

FRAGOLTHERM® 620 is used for non-pressurized, indirect heating in heat transfer systems. Typical application areas include, for example, the processing of polymers and plastics, waste heat recovery, and the manufacture of solar panels.

FRAGOLTHERM® 660

FRAGOLTHERM® 660 is used for non-pressurized, indirect heating in heat transfer systems. Typical application areas include, for example, biomass conversion plants (ORC systems), synthetic fiber production, waste heat recovery, plastics processing, and distillation and extrusion processes.

FRAGOLTHERM® 660

FRAGOLTHERM® 660 is used for non-pressurized, indirect heating in heat transfer systems. Typical application areas include, for example, biomass conversion plants (ORC systems), synthetic fiber production, waste heat recovery, plastics processing, and distillation and extrusion processes.

FRAGOLTHERM® 680

FRAGOLTHERM® 680 can be used in the liquid phase up to 309 °C. In pressurized systems, the maximum flow rate temperature can be increased to 360 °C.

FRAGOLTHERM® DPO

FRAGOLTHERM® DPO is a synthetic heat transfer fluid that can be used in a temperature range between 12 °C and 400 °C. The film temperature at the heating element must not exceed 430 °C.

FRAGOLTHERM® DPO

FRAGOLTHERM® DPO is a high-temperature stable heat transfer fluid for use in temperature-critical systems. Typical application areas include, for example, the production of synthetic fibers and fine chemicals, concentrated solar energy (CSP), and plastics recycling.

FRAGOLTHERM® F-12

FRAGOLTHERM® F-12 is ideal for heating/cooling processes and exhibits high thermal stability. Typical application areas include, for example, the pharmaceutical industry and environmental test chambers.

FRAGOLTHERM® F-12 F

FRAGOLTHERM® F-12 F is ideal for heating/cooling processes and exhibits high thermal stability. FRAGOLTHERM® F-12 F makes it possible to detect leaks in the system under UV light.

Fragoltherm® F-ADX10

FRAGOLTHERM® F-ADX10 is used for pressureless, indirect heating in heat transfer systems and, due to its low viscosity, is particularly suitable for heating/cooling processes. Typical application areas include, for example, plastics processing and injection molding for the automotive industry.

Fragoltherm® F-ADX10

FRAGOLTHERM® 500 is used for pressureless, indirect heating in heat transfer systems and, due to its low viscosity, is particularly suitable for heating/cooling processes. Typical application areas include, for example, plastics processing and injection molding for the automotive industry.

FRAGOLTHERM® F-LT

FRAGOLTHERM® F-LT is ideal for heating/cooling processes that also require operating points in the low temperature range.

FRAGOLTHERM® FN

FRAGOLTHERM® FN is used for pressureless, indirect heating in heat transfer systems. Typical application areas include, for example, the heating of calenders and extruders and use in waste heat recovery systems.

FRAGOLTHERM® FN

FRAGOLTHERM® FN is used for pressureless, indirect heating in heat transfer systems. Typical application areas include, for example, the heating of calenders and extruders and use in waste heat recovery systems.

FRAGOLTHERM® FG-35

FRAGOLTHERM® FG-35 is specifically designed for use in systems where contamination of foodstuffs by the heat transfer fluid cannot be ruled out.

FRAGOLTHERM® FG-35

FRAGOLTHERM® FG-35 is specifically designed for use in systems where contamination of foodstuffs by the heat transfer fluid cannot be ruled out.

FRAGOLTHERM® HT

FRAGOLTHERM® HT is used for pressureless, indirect heating in heat transfer systems. Typical application areas include chemical production, waste heat recovery, plastics processing, synthetic fiber production, and extrusion processes.

FRAGOLTHERM® HT

FRAGOLTHERM® HT is used for pressureless, indirect heating in heat transfer systems. Typical application areas include chemical production, waste heat recovery, plastics processing, synthetic fiber production, and extrusion processes.

FRAGOLTHERM® Q-20

FRAGOLTHERM® Q-20 is formulated for use in indirect heat transfer systems that require both a high temperature level and good start-up viscosity. Despite its good thermal stability and low tendency to oxidize, we recommend a nitrogen blanket in the expansion tank when used in high temperature ranges to prevent premature degradation.

FRAGOLTHERM® Q-32-N

FRAGOLTHERM® Q-32-N is used in various indirect heat transfer systems. Typical application areas include foundries, chipboard presses, calenders, vulcanization plants, drying and mixing systems, as well as plastic injection molding plants.

FRAGOLTHERM® Q-32-N

FRAGOLTHERM® Q-32-N is used in various indirect heat transfer systems. Typical application areas include foundries, chipboard presses, calenders, vulcanization plants, drying and mixing systems, as well as plastic injection molding plants.

FRAGOLTHERM® Q-7

FRAGOLTHERM® Q-7 is a catalytically hydroisomerized mineral oil produced via a special process, with a high content of isoparaffinic hydrocarbons and an extremely low content of sulfur, nitrogen, and aromatic compounds. The base oil undergoes special hydrocracking, solvent deparaffinization, and hydrorefinement processes, as well as subsequent distillation, to produce a high-quality, transparent, and virtually odorless heat carrier liquid.

FRAGOLTHERM® Q-HTF

FRAGOLTHERM® Q-HTF has significantly higher thermal stability and service life than other mineral oil-based heat transfer fluids.

FRAGOLTHERM® Q-HTF

FRAGOLTHERM® Q-HTF has significantly higher thermal stability and service life than other mineral oil-based heat transfer fluids.

FRAGOLTHERM® X-40

Heat Transfer Fluid from -60°C to 120°C / 200°C. FRAGOLTHERM® X-40 is a polydimethylsiloxane-based heat transfer fluid used in baths for a temperature range of -60°C to 120°C and in other open systems in contact with the atmosphere, as well as in closed systems without oxygen supply at temperatures from -60°C to 200°C.

FRAGOLTHERM® X-40

Heat Transfer Fluid from -60°C to 120°C / 200°C. FRAGOLTHERM® X-40 is a polydimethylsiloxane-based heat transfer fluid used in baths for a temperature range of -60°C to 120°C and in other open systems in contact with the atmosphere, as well as in closed systems without oxygen supply at temperatures from -60°C to 200°C.

FRAGOLTHERM® X-400-A (FORMERLY FRAGOLTHERM® X-BF)

Heat Transfer Fluid from 0°C to 200°C / 250°C / 300°C FRAGOLTHERM® X-400-A is a heat transfer fluid based on polydimethylsiloxane used in baths for a temperature range of 0°C to 200°C and in other open systems with contact with the atmosphere at temperatures up to 250°C.

FRAGOLTHERM® X-400-A (FORMERLY FRAGOLTHERM® X-BF)

Heat Transfer Fluid from 0°C to 200°C / 250°C / 300°C FRAGOLTHERM® X-400-A is a heat transfer fluid based on polydimethylsiloxane used in baths for a temperature range of 0°C to 200°C and in other open systems with contact with the atmosphere at temperatures up to 250°C.

FRAGOLTHERM® X-75-A

Heat Transfer Fluid from -40°C to 400°C. FRAGOLTHERM® X-75-A is a polydimethylsiloxane-based heat transfer fluid used in a range of -40°C to 400°C.

FRAGOLTHERM® X-75-A

Heat Transfer Fluid from -40°C to 400°C. FRAGOLTHERM® X-75-A is a polydimethylsiloxane-based heat transfer fluid used in a range of -40°C to 400°C.

Fragoltherm® X-76-A

FRAGOLTHERM® X-76-A is a synthetic heat transfer fluid based on specially modified polydimethylsiloxane. In its new state, FRAGOLTHERM® X-76-A exhibits a low vapor pressure and a viscosity of approx. 7.7 mm²/s at 40 °C. Depending on the temperature and time, the vapor pressure and viscosity change until equilibrium is reached

FRAGOLTHERM® X-76-A

FRAGOLTHERM® X-76-A is a synthetic heat transfer fluid based on specially modified polydimethylsiloxane. In its new state, FRAGOLTHERM® X-76-A exhibits a low vapor pressure and a viscosity of approx. 7.7 mm²/s at 40 °C. Depending on the temperature and time, the vapor pressure and viscosity change until equilibrium is reached

FRAGOLTHERM® X-80

Heat transfer fluid from -40°C to 170°C / 200°C FRAGOLTHERM® X-80 is a synthetic heat transfer fluid based on polydimethylsiloxane used in a range of -40°C to 170°C. The maximum permissible film temperature is 220°C

FRAGOLTHERM® X-80

Heat transfer fluid from -40°C to 170°C / 200°C FRAGOLTHERM® X-80 is a synthetic heat transfer fluid based on polydimethylsiloxane used in a range of -40°C to 170°C. The maximum permissible film temperature is 220°C

FRAGOLTHERM® X-T12

Heat Transfer Fluid from -105°C to 260°C FRAGOLTHERM® X-T12 is a heat transfer fluid based on polydimethylsiloxane. It can be used in closed systems in a temperature range of -105°C to 190°C.

FRAGOLTHERM® X-T12

Heat Transfer Fluid from -105°C to 260°C FRAGOLTHERM® X-T12 is a heat transfer fluid based on polydimethylsiloxane. It can be used in closed systems in a temperature range of -105°C to 190°C.

Fragoltherm® X-T20

FRAGOLTHERM® X-T20