Fragoltherm® W-PGA

Water, the best and most economical heat transfer medium, freezes at 0 °C and has a corrosive effect on many metals and alloys.
By mixing Fragoltherm® W-PGA with water, lower operating temperatures can be achieved, the boiling point is raised, and at the same time, corrosion of metal systems is prevented.
The proven Fragoltherm® W-PGA is an optimal fluid with additives that can be mixed with ordinary tap water for a wide range of applications. Adequate corrosion protection is already provided at a glycol content of 30%.
Fragoltherm® W-PGA can be used for the following applications:

Heating
Process Temperature Control
Floor Heating
Air Conditioning Systems
Cooler Defrosting
Heat Recovery
Solar Systems
Ice Production

Fragoltherm® W-PGA is nearly odorless and biodegradable. It is compatible with common elastomers such as EPDM, PE, PP, and SBR. Separate data sheets are available for its technical and physical properties. Fragoltherm® W-PGA is free of amines and nitrites, which prevents the formation of nitrosamines.
Fragoltherm® W-PGA is based on propylene glycol and has even better toxicity values than Fragoltherm® W-PGA. The FDA (Food and Drug Administration) has universally recognized propylene glycol as a food additive in Part 182 of the FDA’s regulations on food additives.
Constant temperatures exceeding 170 °C lead to premature aging of Fragoltherm® W-PGA. Therefore, for solar energy systems with a standstill temperature exceeding 170 °C, it is recommended to make the expansion tanks as large as possible so that the heat transfer fluid can flow out of the collectors and be accommodated by the expansion tanks when the maximum standstill temperature is reached.